HighPoint RocketRAID 230x User Manual Download Page 10

Page: 10 / 94

Spare disk

A spare disk is a single disk that can be used to automatically rebuild a redundant

array in case of drive failure. Spare disks may also be members of a RAID array. Any

available space on these disks may be used to rebuild other broken arrays.

Legacy disk

Disks attached to the host adapter that contain valid partition tables will be identified

as “legacy” disks. A legacy disk attached to the host adapter can be accessed by the

operating system, but cannot be used to create RAID arrays. A legacy disk must be

initialized before assigning it to an array.

Supports RR1640 RAID arrays

The host adapter will recognize arrays created using the RocketRAID 1640 host

adapter. This feature simplifies hardware upgrade procedures, allowing RR1640 users

to take advantage of evolving SATA and bus technology, without having to recreate

arrays, and restoring data from backup.

Introduction

1-4

Summary of Contents for RocketRAID 230x































































































Search results

Summary of Contents for RocketRAID 230x

Reviews:

Related manuals for RocketRAID 230x

Brands by name

Popular brands

HighPoint RocketRAID 230x, User Manual

Search results

Summary of Contents for RocketRAID 230x

Reviews:

Related manuals for RocketRAID 230x

Brands by name

Popular brands