HighLine Feed Chopper 1251, Operator'S Manual

Page: 32 / 37

Section 3 - Maintaining the Feed Chopper
Adjust Flail Drum/Auger Drive Belt
219125C
Replace Driveline & Shield, Open Shield
219127C
To adjust flail/auger belt tension:
- Turn the nut (4) next to the spring
washer (1) to adjust the spring so it
shows in the cut out window (2).
- Tighten the jam nut (3) on the
threaded rod.
8. Place the right shield (3) back onto the
support and fasten with the bolts.
- Fasten with the spring clamp.
9. Close the left drive shield (2).
- Fasten with the spring clamp.
10. Replace the driveline (1) onto the
gearbox.
Page 3-7