HighLine Feed Chopper 1251, Operator'S Manual

Page: 24 / 37

Section 2 - Operating the CFR 1251 Feed Chopper
Replace the Cover and Door
219158C
8. Replace the cover and door.
- Push the discharge door back to move
the hinge towards the back of the slot.
- Pull the on the rear door pin lock (3) to
compress the spring to allow the pin to
enter the slot on the rear door.
- Align the front door (1) with the long
slot.
- Push the bar (2) through the side
panel into the channel on the bottom
of the front door and through the other
side panel.
- Fasten the bar with the clip pin.
Page 2-9