Use & Installation Manual
3
4
Final Check List
To prevent improper connections leading to
damage of electrical components and so voiding
the warranty, the following steps must be
performed:
1. Check the electrical requirements and make
sure you have the correct electrical supply
and that the oven is properly grounded.
2. Make sure all control knobs are in the off
position.
3. Turn on the power supply to the oven.
4. Check power at the junction box wires using
a voltmeter having a range of 0-250 VAC.
You should find that the voltage reading
between the brown and black wires should
be 220 to 240 V.
5. Set the clock by following these steps:
x
Press [CLOCK] key.
x
Press [+](INC) or [-](DEC) keys to set
hours.
x
Press [CLOCK] key again to change
minutes.
x
Press [+](INC) or [-](DEC) keys to set
minutes, hold to change by ten (10)
minutes step.
x
Press [CLOCK] key or wait for a few
seconds.
Clock is now set.
6. Test the bake mode by following this step:
x
Move cooking mode knob to “BAKE”
position.
x
Cooling fan, oven lights, preheat led will
turn on.
x
A beep is sounded when the oven
reaches the preset 175 °C and the
preheat light turn off.
x
Move the knob back to “OFF” position to
stop cooking.
7. To check the other oven functions refer to
the previous pages.
8. If the oven is working properly turn the
selector knob(s) and the Temperature
Control knob(s) to their off positions.
LEAVE THIS MANUAL WITH THE OWNER.
Summary of Contents for HIO75.2MP
Page 35: ...09HL6140 ed 03 13 ...
