Visit our website for accessories and great innovative health products
Trigenminal neuralgia
Anterior shoulder
Thalamic pain
– Where pain is
most pronounced
Angina
Postherpetic neuralgia
– Above affected dermatome
– Across affected dermatome
Phantom limb pain
– Over main nerve bundle
arising from phantom
– Contralateral
site-median nerve
Rib metastasis
Menstrual pain
Knee pain (osteoarthritis)
– Dual channel if appropriate
Ankle Pain
Neck pain
– Bilateral
– Unilateral
Shoulder pain
Postherpetic neuralgia
– Above affected dermatome
– Across affected dermatome
Stump pain and phantom limb
Lower back pain
or menstrual pain
Hip pain
Sciatica
Peripheral vascular disease
Tendonitis
t.e.n.S electrode pads
Body stimulation (“BODY”):
Four T.E.N.S electrode pads are provided. Use these pads to relieve body aches and
pains (for example, to the knee, shoulder, back and arm). You can use the pads either
by themselves or at the same time when using the foot pads. The choice is yours.
Quick Setup Guide
Your Circulation Booster has been designed with home users in mind so please
consult the safety precautions and contraindications on pages 7-8 prior to use.
foot pads
Foot and leg stimulation (“SOLE”):
1.
Remove the power adapter from
its slot in the base of the unit and
replace the plastic cover.
2.
Plug the device into the nearest
electricity socket and place the
device at a comfortable distance
from your chair.
3.
Remove all socks or stockings and
place both bare feet onto the large
foot pads, ensuring as much of your
sole as possible is in contact with
the pads
(NB. Both feet are required
to create the circuit and it does not
matter if your foot is too big or small
for the foot pad)
.
4.
Press the
“POWER ON/OFF”
button
to turn the device on or push the
“ON”
button of the remote control.
The LCD display will read
“SOLE 0”
,
“TIME 30”
,
“BODY 0”
.
5.
Using either the remote control or
the buttons on the device, set the
intensity level by using the
“-/+”
buttons for the
“INTENSITY SOLE”
control. The LCD display for
“SOLE”
will change and the
“TIME”
will
commence counting down from
0 minutes.
6.
Continue to increase the intensity
until you can feel mild impulses
in your feet and calf muscles but
remain comfortable. Each person’s
sensitivity is different so you
may safely increase the intensity
from 1 to a maximum level 99.
We recommend using a heel balm
on your feet to improve conductivity
and stimulation.
1.
Plug the device into the nearest
electricity socket and place the device at
a comfortable distance from your chair.
2.
Connect the pins on the leads to the
wire on each set of body pads.
3.
Place the pads onto clean, dry skin
targeting the area where you suffer
muscular or joint pain. Below are
illustrated examples of T.E.N.S
treatment areas for pain relief.
4.
Plug the other end of the lead into one
of the
“ACCESSORY SOCKET”
ports
located in the centre of the device.
5.
Using the remote control or buttons
on the device, set the intensity level
by using the
“-/+”
buttons for the
“INTENSITY BODY”
control.
(NB. You
can use the body pads independently
or at the same time as the “SOLE”.
You can also adjust the intensity for
“SOLE” and “BODY” separately)
.
6.
You should set the intensity
so you can feel the pulses
but remain comfortable.
7.
When not in use, you can store the
pads on either side of the hard white
plastic pad protectors provided.
