background image

Default value

Description

DHCP

Enable or Disable DHCP

0.0.0.0

Static IP address of ipphone , which will take effect if
DHCP is disabled

255.255.255.0

The NetMask used when DHCP is disabled

0.0.0.0

The default gateway used when DHCP is disable

0.0.0.0

when "Use following DNS Server IP", this will be the
primary DNS server

0.0.0.0

 when "Use following DNS Server IP" selected, this will be
the secondary DNS server

0

When layer 3 Qos is adopted, set the Precedence value of
IP frames.

0

When layer2 Qos is adopted, set VLAN tags (802.1Q) and
priority value of Ethernet frame (802.1P) respectively.

Select phone settings ,enter password(default 12345678) to enter settings page.

Set the rate as 6.3K or 5.3K of G723.1 Codec

Automatic Gain Control (AGC)

Acoustic Echo Cancellation (AEC)

iLbc Frame Size

Enable/disable VAD.

Enable/disable AGC.

3.1.2 Voice Settings

Secondary DNS

Layer 3 Qos

Layer 2 Qos

2. Installing Guide

2. Connect the RJ-45 connector labeled 'LAN' to a PC.

3. Optionally, you can connect the connector labeled 'Lan' to a switch / hub and connect multiple PCs to the latter.

Please follow the instruction below for setup

open the IE browser and input the IP address of the phone into address bar.input password to access the settings page ,
phonebook and upgrade page.(default password is 12345678.)

3.1.1 Network Settings

3.1 Settings Menu

4.Connect the +5V switching power adapter to Power jack

5.Move the power switch to ON

    After booting ok,LCD will display ip address of device.Then you can use Web Browser for system
configuration.

(Notes:configuration and update can only be done with handset down and speaker key not be pressed.)

3. Configuration with Web Browser

1. Connect the RJ-45 connector labeled WAN to a router

Option

Connection Type

Voice Activity Detection (VAD)

Enable/disable AEC.

This parameter defines the iLbc Frame Size as 20ms or 30ms.

Set the number of voice frames transmitted per RTP packet. The suggested number is
below 3(including 3) in order to reduce delay.

6 different Voice Codec types including g729

g7231

g711u

g711a , gsm and iLBC

G.723.1 rate

IP Address

Subnet Mask

Default Gateway

Primary DNS

Preferred Voice Codec

iLbc Payload Type

Voice Frames per Tx

Summary of Contents for GF302
















Reviews: