11.1 Record Music
Use CoolEdit to record music, here take example for Cool Edit Pro Version 2.1.
Set recording control property:
1. Click PC volume property ;
2. Point
“
property
”
on
”
options
”
menu and click it;
3. Select
“
record
”
in
“
adjust volume
”
;
4. Select all volume control in
“
display volume control
”
and click
“
OK
”
;
5. Select
“
wave output balance
“
only and exit;
Use CollEdit to record:
1. Run CoolEdit.exe;
2. Point
“
New
”
on
“
File
”
menu and click it;
3. Select
“
8000
”
in
“
Sample Rate
”
,
“
Mono
”
in
“
Channels
”
,
“
8-bit
”
in
“
resolution
”
and click
“
OK
”
.;
4. Point
“
Show Transport Buttons
”
on
“
View
”
menu and select it. The following controllers display at the down-left
5. Open player
”
Windows Media Player
”
;
6. Point
“
Transport Buttons
”
and click the record button ;
7. Time for record ring tone is 24.48 seconds;
8. Point
“
Save As
…”
on
“
File
”
menu and click it;
9. Click
“
Options:
10. Select
“
8-bit mu-Law Compressed
”
in
“
Data Formatted As
”
;
11. Select
“
PCM Raw Data (*.pcm, *.raw)
”
in
“
Save Type
”
;
12. Input filename and click
“
Save
”
;
11.2 Cut Music File
Music file updated to a phone must be a binary data file. After recording music, use convert command to cut a music
file(.pcm) to 196608Bytes and save as a binary data
Input command format:
Convert
–
r|--ring2bin srcFile dstFile(Enter)
11.3 Update Music File
Music Files include ring tone and call hold music. These file are named according to the file naming principle, namely
ringtone_xxx.dat and holdmusic_xxx.dat. Then copy the music file and convert.exe to D:\>, and use tftp command to update
the phone..
Example 1, Update ring tone file:
1. record a music file allice.pcm;
2. use convert command to cut the music file and convert it to binary data file;
D:\>convert -r allice.pcm ringtone_allice.dat(Enter)
3. Using the following commands to update:
D:\>tftp -i 192.168.1.205 put ringtone_allice.dat (Enter)
"192.168.1.205" is phone IP address.