After the properly setting phone starts, it will get the settings file from the upgrade server. If onfig_id in the settings file is
different from the one in the phone, the phone will be updated with all the parameters in the file.
After setting parameters, the phone will restart to make the parameter valid. If prov_filename item in new parameters is
different from the firmware filename in the phone, the phone will connect with the server to get the firmware file and update
automatically.
When
“
auto-upgrade interval
”
in the phone settings expires, the phone will connect with the server to get [MAC].txt
automatically. If config_id is the same with the one in the phone, it will stand by.
Save the firmware file for upgrading in the server. Rule of name is gf302_protocol_language_version.bin
7.3 Set server address and port
Please choose the keyboard or WEB orders and set Auto-provisioning server address and server port. For more details see pho
7.4 Auto-upgrade settings file and firmware file
prov_filename=gf302_iax2_us_009011.bin
（
for setting a file name for upgrading the firmware
）
………….
digit_dialing=0
7.2 Preparing firmware file
7 HTTP Auto-Provisioning
7.1 Settings file and firmware file
Prepare the settings file named [MAC].txt in the upgrade server. [MAC] is MAC address of the phone to be upgraded, such
as 00-18-1f-01-00-3a.txt. a settings file can be created by getopt.bat command and for more details see getopt section in
chapter 5. A settings file example:
config_id=0008 (as a flag for settings file)
mac_address=0x00,0x18,0x1f,0x01,0x00,0x3a
……………
provision_server=192.168.1.251
provision_port=8080
provision_ttl=60
3. Restore factory configuration: Press OK key to confirm.AR168X SIP Phone will reboot automatically and restore to
factory default settings.
6.12 RESTORE FACTORY CONFIGURATION
1. Enter the menu mode: Press MENU key to main menu. Select
“
PHONE SETTINGS
”
and press OK key to into next
submenu.
2. Select DEFAULT item: Use UP or DOWN to scroll to
“
Default Cfg
”
item.
6.11 Checking Message
The incoming messages will be indicated by a flashing message LED. Press MESSAGE key to trigger the phone to call the
pre-set service number The flashing LED will be out after checking voice messages.
6.9 Mute
During a current call, press MUTE Key. The LED on the phone lights up, indicating that the other party cannot hear you.
To cancel this set, press MUTE Key again, LED of MUTE out
6.10 Don’t Disturb (DND)
When Phone on hook, press Mute/DND Key to trigger the phone to DND status. The LED of Mute lights up indicating that
phone will send the busy tone to the caller during an incoming call.To cancel this set, press Mute/DND Key again, LED of
MUTE out.
