High End Systems Dichroic Theatre Series, User Manual

Page: 53 / 60

Dichroic Theatre ™ User Manual ColorCommand Installation B - 3
B
• The core which is coloured green and yellow must be connected to the plug
terminal which is marked with the letter “E,” or by the earth symbol
, or
coloured green, or green and yellow.
• The core which is coloured blue must be connected to the terminal which is
marked with the letter “N” or coloured black.
• The core which is coloured brown must be connected to the terminal which is
marked with the letter “L” or coloured red.
Warning: Class 1 equipment - This equipment must be earthed.
Vatic Fitter Heads Information - Danmark
Advarsel: Beskyttelse mod elektrisk chock.
Vigtigt!
Lederne med gul/groen isolation maa kun tilsluttes en klemme maerket
Mounting a ColorCommand Fixture
This section describes mounting procedures for a ColorCommand Fixture. For
information on mounting a ColorPower supply, see Chapter 2. For information on
mounting Source Four fixtures fitted with ColorMerge modules, consult the
documentation for your Source Four fixture.
You can mount the ColorCommand fixture in any orientation suspended from a support
system (such as a truss) or standing on it’s yoke on a stable surface.
Mounting Considerations
Before mounting the ColorCommand fixture on a truss or another type of support, do all
of the following:
• Verify the truss or support will handle the combined weight of all the devices on the
truss.
• High End Systems strongly recommends using safety cables to attach any of its
fixtures to a truss. You can order safety cables from your High End Systems dealer/
distributor (see “Optional Accessories” on page 1-7).
• You must supply your own clamps to attach the ColorCommand fixture to the
support. Verify that the clamp(s) you use are capable of supporting the weight of the
unit. Each ColorCommand weighs 20 lbs. You can order cheeseboroughs for a two-
inch truss from your High End Systems dealer/distributor (see “Optional
Accessories” on page 1-7).
eller