High End Systems Dichroic Theatre Series, User Manual

Page: 43 / 60

Dichroic Theatre™ User Manual Important Safety Information A - 1
A
Appendix A:
Important Safety Information
Warning: For Continued Protection Against Fire
1. This equipment (ColorCommand
TM
) is designed for use with a Philips #134205 (750W) /
#134213 (800W) lamp only. Use of any other type lamp may be hazardous and may void
the warranty.
2. Do not mount on a flammable surface.
3. Maintain minimum distance of.3 meter (0.98 foot) from combustible materials.
4. Replace fuses only with the specified type and rating.
5. This equipment for connection to branch circuit having a maximum overload protection
of 20 A.
Warning: For Continued Protection Against Electric Shock
1. If this equipment was received without a line cord plug, attach the appropriate line cord
plug according to the following code:
•
brown–live
• blue–neutral
• green/yellow–earth
2. As the colours of the cores in the mains lead of this equipment may not correspond with
the coloured markings identifying the terminals in your plug, proceed as follows:
•
the core which is coloured green and yellow must be connected to the terminal in the
plug which is marked with the letter E or by the earth symbol
, or coloured green
or green and yellow.
• the core which is coloured blue must be connected to the terminal which is marked
with the letter N or coloured black.
• The core which is coloured brown must be connected to the terminal which is marked
with the letter L or coloured red.
3. Class I equipment. This equipment must be earthed.
4. Equipment suitable for dry locations only. Do not expose this equipment to rain or
moisture.
5. Disconnect power before re-lamping or servicing.
6. Refer servicing to qualified personnel; no user serviceable parts inside.
Warning: For Continued Protection Against Exposure To Excessive Ultraviolet (UV)
Radiation
1. Do not operate this equipment without complete lamp enclosure in place or if shields,
lenses, or ultraviolet screens are damaged.
2. Change shields, lenses, or ultraviolet screens if they have become visibly damaged to such
an extent that their effectiveness is impaired, for example by cracks or deep scratches.
3. Never look directly at the lamp while lamp is on.
Warning: For Continued Protection Against Injury To Persons
1. Use secondary safety cable when mounting this fixture.
2. Caution: hot lamp may be an explosion hazard. Do not open for 5 minutes after switching
off. Wear eye and hand protection when re-lamping.
3. Equipment surfaces may reach temperatures up to 100° C (212° F). Allow 5 minutes for
cooling before handling.