High End Systems Cyberlight 2.0, User Manual

Page: 29 / 62

CHAPTER 3
The Menu System
Cyberlight ® 2.0 User Manual 17
TEST S/UP
OFF
ON
Setup mode for mechanical homing
INFO
VER #### Shows the
UNIQ ######## Shows the fixture’s unique ID number
TEMP
CURR
CPU ####
Shows the current internal temperature at the logic
board
LPS ####
Shows the current internal temperature at the
lamp power supply
MAX
CPU ####
Shows the maximum internal temperature
recorded at the logic board
LPS ####
Shows the maximum internal temperature
recorded at the lamp power supply
MIN
CPU ####
Shows the minimum internal temperature
recorded at the logic board
LPS ####
Shows the internal temperature recorded at the
lamp power supply
RST YES
HOLD When you select Yes the Max and Min
temperature readings reset to the current. DONE
will display when the process is complete.
DONE
F/HR #### Shows current number of fixture hours
DMX 1-512 ####
Shows the DMX data for the selected DMX
channel on the link.
L/HR #### Shows Lamp hours
L/ST #### Shows the current number of Lamp strikes
L/RS
NO When you select Yes the Lamp hours are reset to
zero. DONE will display when the process is
complete.
YES DONE
FAN
LMP1 ####
Shows the rotations per second of the two fans
located in the lamp power supply compartment
LMP2 ####
M/VR
P/T #### Shows Pan and Tilt HW.SW version
Z/FC #### Shows Zoom and Focus lenses HW.SW version
FR/C #### Shows Frost and Cyan flags HW.SW version
M/Y #### Shows Magenta and Yellow flags HW.SW version
C/L1 ####
Shows Color and Rotating Gobo Wheel HW.SW
version
LAMP #### Shows Lamp HW.SW version
FAN #### Shows Fan HW.SW version
DISP #### Shows LED display HW.SW version
Level 1 Level 2 Level 3 Level 4 Level 5 Description