Runner Installation
TIP: For new kitchens, where possible, it is easiest to place the
carcase on a bench for installation of the runners.
Step 1 - For each runner align the template with the top and front
edge of the carcase.
Step 2 - On each side mark the 4 side mount (GREEN) holes
through the template.
Step 3 – Remove the template and drill 5mm holes 13mm deep at
each location.
Step 4 - Secure runners using the 13mm Euro screws provided.
NOTE: If the unit is to be positioned higher in the cabinet trim
the required amount off the top of the template. Trimming the
template will adjust the mounting hole positions for both the
collar and runner installation so they remain correctly aligned.
The maximum amount that can be trimmed off is up to:
CRL160 - 40mm.
CONTENTS
OF
CAR
TON
TW
O
:
Left hand runner
and mount
Right hand runner
and mount
Front edge
of carcase
NOTE: Cabinet shown lying on left side.
Top edge
of carcase
13mm Euro screw (8pcs)
Concelo Laundry CRL160D
Runner Installation Sheet
Read all instructions before installing this bin unit.
Failure to install the bin correctly may void warranty.
HIDEAWAY NEW ZEALAND
09 426 7456 / [email protected] / www.hideawaybins.co.nz
HIDEAWAY AUSTRALIA
1800 042 642 / [email protected] / www.hideawaybins.com.au
