Step by Step Instructions
STEP 1: Prepare all Wood Cabinet Components
1. Clean and sand where necessary.
2. Tape edges that will be exposed:
Face Panels
-
Tape all four edges
Bottom Kick
-
Tape two long edges
Bottom Rear Base
-
Tape one long edge
Head Board
-
Tape two long edges
Top Panel
-
Tape one long edge
Top Facia
-
Tape two long edges
Side Panels
-
Tape two long edges
3. Finish Components to your desired stain or paint colors.
(Side Panels, Headboard, Top Facia, Top Panel, and Bottom Kick)
NOTE:
Do Not Finish the Bed Face Panels or the Rails
at this time. To insure a positive glue bond, they
should not be finished until after assembly. (Step #6).
Drawing 1.
Drawing 2.
Bed Assembly (Horizontal Orientation)
8.
9.
2.
6.
5.
3.
6.
7.
1.
1.
4.
Front View
(A)
(B)
6.
(B)
(A)
7.
1.
1.0” (25)
5.
6.
4.
1.
Head of Bed Face Panel
(Head Rail and Bed Face are Flush)
Side View
Stiffener Placement
Recommended for
King
Beds
Stiffener
Stiffener
Plywood End Rail
Rails
Cleats
Stiffener
Stiffener
8.
