H
"1
oosT
Outdoo「Antenna
3. Plug-in the DC power supply and power on the booster
产
二
—一二—－
Note: The booster will flash blue lights that will last for about 20 seconds while it
is adjusting to the current network environment.
Troubleshooting Guide
LED STATUS INDICATORS
Solid blue
Below full output powe
『
Slow flashing blue
Full output power
Alarm LED
Quick flashing blue
Output powe
『
is too high
Quick flashing red
Booster will automatically shut down
excessive downlink signal
Slaw flashing blue
Bluetooth disconnected
Bluetooth LED
Quick flashing blue
Bluetooth connected
I
Common Issues
Troubleshooting Instructions
I
The vehicle booste
『
is installed but
there's still no signal
The signal is not stable after turning on
the booster power
The Alarm LEDs a
『
e quick flashing
blueor red or off
There is No Power
Check to see if the vehicle is started.
Double check connections to make
sure none are loose.
Check that the outdoor signal is stable
by referring to your mobile device and
checking your coverage.
Check to make sure vehicle is not
parked too close to a cell tower.
Check that the booster is turned on and
the DC power outlet is plugged into the
DC 12V port or lighter adapter
8/12
