V30 GNSS RTK System Manual
55
4. Turn on the instrument and set it to static surveying mode.
The satellite led flashing means the instrument is tracking the
satellites. The satellites are locked once the satellite led turns
into constant on. Status led flashes due to your collection
interval. If setting the interval to 1 second the led will flash
once a second.
5. Turn off the instrument after the static survey is finished and
record the turn-off time.
Download and post-process the data
Note: Don’t move or change the collecting
setting while the instrument is
collecting data.
Download data with USB drive
The data of V30 receiver can be downloaded with USB
drive, use the Y type data cable, connect one side to USB port
of PC and the other side to the 8-pin jack of main frame. After
connecting, you will see a folder named GNSS in the PC, the
static data are here, you can copy the according files directly.
Note: The series port can not be used to download
data, but can delete static data.
Management software operation for static survey
