i
RTK5 Smart GNSS System User Manual
33
When the receiver gets fixed solution, keep the receiver static until
Device stationary
is marked with
;
②Shake
After finish
Device stationary
, shake the receiver back and forth (once every 1 second) to perform a
shake for initialization, until
Shake
is marked with
;
When all the initialization items are ticked, the receiver will prompt
Tilt compensation started
and the
tilt survey icon is illuminated which means the tilt survey initialization is completed, and you can
perform the tilt survey on the receiver.
Notice:
1. Make sure that the actual pole height is consistent with the set pole height before tilt
survey.
2. When turning on the "Tilt Survey" switch, initialization operation is needed before
normal use.
3. To meet the operational needs of most users, the maximum measurement angle of tilt
survey is 70°.
4. The receiver will prompt Tilt compensation stopped after 30 sec to ensure the
measurement accuracy. Shake the receiver slightly when the prompting occurs.
5. To ensure measurement accuracy, do not rotate the receiver quickly during the tilt
survey
’s working process.
6.
The data quality will be reduced in the occlusion environment. Please use tilt survey in
an open environment if you have higher accuracy requirements.
2.8 PPP service (optional)
2.8.1 Register and authorization
PPP service is an optional function of the new iRTK5 and extra cost will be charged for the service.
Authorization can be obtained via register on Hi-Survey software or WEB UI.
Notice:
In order to experience the PPP service better, please do survey work in
the open environment.
2.9 aXTR technology(optional)
The
aXTR technology
function is mainly to solve temporary interruption issue in the data link settings.
When the RTK correction is interrupted, the receiver can recognize the data link exception fleetly and
