i
RTK5 Smart GNSS System User Manual
32
2.6.5 Set the Rover
The Rover receiver is fixed on the telescopic centering pole, and the controller is fixed on the
controller carrier which is connected to the centering pole. The Rover station settings are basically the
same as the base station, mainly including the working mode setting, elevation mask, etc. The
difference is that the working mode of Rover station adds another “
Data Collector Internet
”.
Figure 2-6-3 Set the Rover 2-6-4 Datalink of Rover
Please refer to Chapter 3 of the
YFZ-2014-1925_Hi-Survey Software User's Guide B8
for the detailed
settings of the Rover station.
2.7 Calibration-free tilt survey
Connect the receiver in Hi-Survey software to open the
Tilt Survey
in the
Survey
Surveying
Configure
Data
interface. Click the tilt survey icon, and follow the prompt on the
interface of Hi-Survey to finish the initialization.
2-7-1 Tilt survey 2-7-2 Initialization
①Device stationary
