Hi Sharp HS-ML22M1, User Manual, Page: 29 / 40

29
7-2. Step by step
:
z Common Functions:
„ Select DVR(must to do it first): Dial the DVR ID number by the
virtual key
Æ
click the mouse main button on
DVR1/DVR2 icon
(if direct to select DVR1/DVR2, that will be set last
selected DVR ID number)
. And then changes the source
input port to match the DVR routing
„ Split screen: Click the mouse main button on the
4P/ 9P/ 16P
icon
to activate the split screen dependent on the number of
camera setting.
„ Play: Click the mouse main button on the
Play icon.
„ Stop: Click the mouse main button on the
Stop icon
„ Record: Click the mouse main button on the
Record icon
to
start the record and click it again to stop the record.
„ Zoom: Click the mouse main button on the
Full/ Ch sel. Icon
(if
screen is not full) Æ Click the mouse main button on the
Zoom
icon
„ Menu Control: Click the mouse main button on the
Menu icon
to pop up the DVR OSD and control the OSD by the virtual
keypad (Esc, Enter, Up, Down, Left, Right)
„ Freeze: Click the mouse main button on the
Freeze icon
to
enable it Æ click the mouse main button on the
Freeze icon
again to disable it
„ Select Channel: Dial the channel
Number
by virtual key Æ Click
the mouse main button on the
FULL/ Ch Sel. Icon, and that
should be modify the CAM ID as same time.
„ Rewind: Click the mouse main button on the
Rewind icon
„ Fast-Forward: Click the mouse main button on the
Fast-Forward icon
z Specific Model
：
„ HS_TYP A
‹ Alarm: Click the mouse main button on the
Alarm icon
‹ Set up: Click the mouse main button on the
Setup icon
‹ Backup: Click the mouse main button on the
Backup icon
‹ Spot: Click the mouse main button on the
Spot icon
‹ Step >: Click the mouse main button on the
Step > icon
‹ Step <: Click the mouse main button on the
Step < icon
‹ Sequence(Auto): Click the mouse main button on the