17
EN
CONTACTING POLO
ABOUT PM1100
Each process is uncomplicated and
easy to accomplish. The PM1100 is designed for charging
all types of 12V lead-acid and 12V lithium-ion batteries,
including Wet (Flooded), Gel, MF (Maintenance-Free), CA
(Calcium), EFB (Enhanced Flooded Battery), AGM (Ab-
sorption Glass Mat), and LIB (Lithium Ion) batteries. It
is suitable for charging battery capacities from 2 to 40
Amp-Hours and maintaining all battery sizes.
MOUNTING
The PM1100 has two external holes for
mounting. Mount the charger in a desired location with
6 self-drill screws. Make sure there are no obstructions
behind the mounting surface. It is important to keep in
mind the distance to the battery. The DC cable length
from the charger, with either the battery clamp or eye-
let terminal connectors, is approximately 75-inches
(1,900mm).
CHARGING MODES
The PM1100 has five modes: Stand-
by, 12V NORM, 12V COLD/AGM, 6V NORM, and 12V LITH-
IUM. Some charge modes must be pressed and held
for three seconds to enter the mode. These “Press and
Hold” modes are advanced charging modes that require
your full attention before selecting. “Press and Hold” are
indicated on the charger by a red line. It is important to
understand the differences and purpose of each charge
mode. Do not operate the charger until you confirm the
appropriate charge mode for your battery. Below is a
brief description:
www.polo-motorrad.de
Polostr. 1
D-41363 Jüchen
Website:
Email:
Mailing Address:
Press & Hold
Press & Hold
Mode
Explanation
Standby
In Standby mode, the charger is not
charging or providing any power to
the battery. Energy Save is activated
during this mode, drawing microscopic
power from the electrical outlet. When
selected, an orange LED will illuminate.
No Power
12V
NORM
For charging 12-volt Wet Cell, Gel Cell,
Enhanced Flooded, Maintenance-Free
and Calcium batteries. When selected,
a white LED will illuminate.
14.5V | 1.1A | 2-40Ah Batteries
12V
COLD/
AGM
For charging 12-volt batteries in cold
temperatures below 50ºF (10ºC) or
AGM batteries. When selected, a blue
LED will illuminate.
14.8V | 1.1A | 2-40Ah Batteries
6V
NORM
For charging 6-volt Wet Cell, Gel Cell,
Enhanced Flooded, Maintenance-Free
and Calcium batteries. When selected,
a white LED will illuminate.
7.25V | 1.1A | 2-40Ah Batteries
12V
LITHIUM
For charging 12-volt lithium-ion bat-
teries, including lithium iron phos-
phate. When selected, a blue LED will
illuminate.
14.2V | 1.1A | 2-40Ah Batteries
