on the basis of serial connection,using Windows HyperTerminal program
It needs an adapter plate to connect the module to the serial of the PC,and then
run the Windows HyperTerminal program,and do the paraments configuration with
AT+Instruction set,this approach is the most flexible,but it needs users are familiar with
AT+Instruction set.
on the basis of network connection,using IE browser program
This approach requires the module has connected to a wireless network. On the
PC connected to the same wireless network, use IE browser to connect the WEB
server of the module. This approach has the advantages of simple operation and
intuitive interface.
47B47B
2.3.6
39B48B48B48B
Firmware upgrade online
The module supports firmware upgrade online, there are two methods to upgrade the
firmware:
on the basis of serial connection, using the configuration management program
on the basis of network connection, using the IE browser program
3
2B2B2B2B
Quick Start Wizard
3.1
11B12B12B12B
Preparation
Hardware
HLK-WIFI-M04
PC
serial
cable
Software
UART-WIFI
configuration management program
serial debugging software,such as serial debugging assistant, serial master
（
ComMaster.exe
,
）
and the like.
