figure5-22 the configuration of super terminal
2
、
If the wireless module has started configuration mode
(
see the 4.2.1 section
)
or the
work mode is set to command mode
,
please jump to step 5 directly
,
otherwise
,
it needs
to make the module exiting the transparent transmission mode according to following
approachs at first
(
refer to section 4.2.2.4
)
;
3
、
Open a notepad to edit escape character string
(
the default escape character is‘+’
)
and save.
4
、
Wait for the time specified by the parameter of escape time
(
its default setting is 2
second
)
,
select ‘send text file’ in the ‘transmit’ menu
,
send escape character string file
,
the module return ‘+OK’ information if success
;
5
、
Input ‘AT+E’ instruction to open input return display
(
before it, the character that user
input can not be display in the super terminal interface
)
;
6
、
Thus
,
user can use super terminal program to test the most of AT+ instruction set
,
for
example, the command of network scan can
be insteaded of inputtig ‘AT+WSCAN’, it’s
shown as the following sketch map.