User Manual
第
29
页 共
30
HLK-B35
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Integration instructions for host product manufacturers according to KDB 996369 D03 OEM
Manual v01
2.2 List of applicable FCC rules
FCC Part 15.247
2.3 Specific operational use conditions
This transmitter/module and its antenna(s) must not be co-located or operating in conjunction with any
transmitter. This information also extends to the host manufacturer’s instruction manual.
2.4 Limited module procedures
not applicable
2.5 Trace antenna designs
It is “not applicable” as trace antenna which is not used on the module.
2.6 RF exposure considerations
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This compliance to FCC radiation exposure limits for an uncontrolled environment, and minimum of 20cm
separation between antenna and body.
The host product manufacturer would provide the above information to end users in their end-product
manuals.
2.7 Antennas
PCB antenna; 1dBi; 2.412 GHz
～
2.462GHz, 2.402 GHz
～
2.480GHz
2.8 Label and compliance information
The end product must carry a physical label or shall use e-labeling followed KDB784748D01 and KDB
