User Manual
第
23
页 共
30
HLK-B35
4.4. Reset
code
:
char *commands_device_default=” at+default=1\r\n\”; //reset
Com_send(commands_device_default);
feedback
:
at+default=1
OK
Then the module will restart and restore the factory default configuration parameters
The hardware reset method is
:
Long press the ES0 button on the bottom plate for more than 3
seconds to restore the factory settings.
For more functions, please use the configuration software to set up. Figure 13 below shows the
related instructions of the configuration software.
Configuration software instruction
Pic 13
Serial port configuration interface