HHP IMAGETEAM 4600, User Manual

Page: 103 / 234

7 - 13 IMAGETEAM™ 4600/4800 User’s Guide
Linear Symbologies
Code 93 Code Page
Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the bar
code being scanned was created using a code page that is different from the one
the host program is expecting. If this is the case, scan the bar code below, select
the code page with which the bar codes were created (see
Code Page Mapping
of Printed Bar Codes on page A-5), and scan the value and the Save bar code
from the Programming Chart on the inside the back cover of this manual. The
data characters should then appear properly.
Code 2 of 5
<Default All Code 2 of 5 Settings>
Code 2 of 5
Code 2 of 5 Message Length
Scan the bar codes below to change the message length. Refer to Message
Length Description (page 7-2) for additional information. Minimum and Maximum
lengths = 1-48. Minimum Default = 4, Maximum Default = 48.
Code 93 Code Page
On
* Off
Minimum Message Length
Maximum Message Length