HH Simonsen ROD VS7, Manual

Page: 10 / 20

Thank you for choosing HH Simonsen® Products.
This appliance is designed for safety and performance. For
safety, check label and plug frequently for any sign of wear
and tear. SUPER ENERGY 25 anodized curling irons seal the
hair cuticle and create a shiny effect on you curled hair. You
can adjust the temperature settings to tailor it to you hair
type. Anodized curling irons release gentle, farinfrared heat
that helps preserve the natural moisture and luster in hair,
lons help in inhibiting bacteria and odor buildup. on colored
hair, ceramic curling irons lock hair color and resist fading!
Curling Iron Tips: Creating Waves
If you want big, bouncy wave, use a curling iron with a
very wide diameter. For tighter curls, use one that has a
narrower diameter .Here’s how to choose the right curling
iron for the type of look you’re after.
Big Waves
A curling iron that is 2 inches in diameter will create large,
loose waves in longer hair, or help smooth short hair.
TIP: Wrap large sections around iron to smooth, warp
small sections to create waves.
Slight Waves
A curling iron about o1.5 inches in diameter will create
nice, soft waves.
TIP: Curl small section of hair with the curling iron, then
clip each section to head. When cool, release pins and run
fingers through hair.
Big Curls
The size used to create large curls is usually threequarters
to one inch in diameter.
TIP:
Sprits small sections with mousse, then warp them
around iron and hold for five seconds. Release curling iron,
let hair cool, then use fingers to separate curls.
Tight Curls
The size used to create tight curls is usually only three-
eighths in diameter, these narrow curling irons produce a
ringlet effect.
TIP:
Wrap small sections from ends to roots in a spiral.
Hold five seconds. Release curl, then let cool sprits with
hair spray, but do not touch!
Instructions For Use
1. Insert the plug into electrical outlet, ensuring that the
supply voltage matches the rated voltage stated on the
label
2. Press the OF/OFF to turn the appliance on. The default
temperature setting is 180 ˚C.
3. Press the OF/OFF to set the temperature for 120˚C,
160˚C and 200˚C as you like
4. Press the ON/OFF to turn it off after you finish the
treatment
5. Disconnect the appliance from the power supply
6. Allow the appliance cool down completely before storing
1. Safety
Before using any HH Simonsen® product, piease read the
foliowing instruc tions carefully. This will safeguard you from
possible hazards and prevent the appliance from damage
caused by incorrect operation. Always operate according to
the instructions! HH Simonsen® cannot be held responsible
for any direct or indirect damage caused by missuse of this
product.
UK
10