background image

Harrington Generators International

3

        498-1019

Petrol Generator

Certi

fi

 cation

Certifi cation

EC Declaration of Conformity

In accordance with ISO/IEC 17050-1:2004 Conformity Assessment - Suppliers’ Declaration of Conformity

We:

Harrington Generators International Ltd.
Ravenstor Road, Wirksworth, Derbyshire DE4 4FY

Declare that 
Equipment

110V/230V Dual Voltage or 400V/230V Petrol Generators

Model Name

VRP80-TIN12-T

VRP96D-TL

VRP96T-TL

Electrical Power P

el

8.0 kW e

9.6 kW e

9.6 kW e

Conforms to the protection requirements of the following EC Council Directives:

2006/42/EC  

Machinery Directive

2006/95/EC  

Low Voltage Directive

2014/30/EU  

EMC Directive

2000/14/EC 

Noise Emission in the Environment by Equipment for use Outdoors Directive Annex V111 

97/68/EC 

Measures against the emission of gaseous and particulate pollutants from internal 

                               combustion engines to be installed in non-road machinery.
                               European level Stage 3A (for engines above the minimum kW power threshold).

And has been designed and manufactured to the following standards: 

BS5000 Part 3 

Rotating electrical machines of particular types or for particular applications.                         

                               Generators to be driven by reciprocating internal combustion engines.

EN60204-1 

Safety of machinery. Electrical equipment of machines. General requirements.

EN12601 

Reciprocating internal combustion engine driven generating sets. Safety. 

BS  EN61000-6-1  EMC.  Generic  Standards.  Immunity  for  residential,  commercial  and  light-industrial                         
                               environments.

BS EN61000-6-2  EMC. Generic Standards. Immunity for industrial environments.

BS EN61000-6-3  EMC. Generic Standards. Emission standard for residential, commercial and 
                               light-industrial environments.

BS EN61000-6-4  EMC. Generic Standards. Emission standard for industrial environments.

BS ISO 3744 

Acoustics.  Determination of sound power levels of noise sources using sound pressure.

Noti

fi

 ed Body for 2000/14/EC Noise 

HORIBA MIRA UK 

Emission in the Environment by   

Watling Street

Equipment 

for 

use 

Outdoors 

Directive 

Nuneaton 

       

 

     Warwickshire 

CV10 

0UT

Noti

fi

 ed Body Number:   

 

00888

I declare that as the authorised representative, the above information in relation the supply and manufacture of 
this product is in conformity with the stated standards and other related documents following the provision of the 
above EC Directives. 

  Signed 

 

      C. 

Coulton

  Jan 

2017      Quality 

Manager

 

 

 

 

 

 

Summary of Contents for VRP80-TIN12-TL

























Reviews: