background image

Petrol Generator

Precautions

The generator can constitute a hazard to users, nearby personnel and property unless the following precautions 
are observed during operation:

 

•   Ensure that you know how to stop the engine in an emergency.

 

•   Exhaust fumes are poisonous and can kill.

 

  -   Do not

 operate the generator in a con

fi

 ned area.

 

 

-   Ensure

 that the area surrounding the machine has no restrictions that would prevent an adequate 

fl

 ow  

 

    of clean, ambient air.

 

•   The generator should be operated in an open space with free air 

fl

 ow on all sides, at least one 

 

  metre from other equipment and buildings. The surrounding area should be clear of any combustible  

  material. 
 

•   Fuel is highly 

fl

 ammable, when refuelling:

 

 

-   Do not

 run the engine.

 

 

-   Do not

 smoke.

 

 

-   Avoid

 over

fi

 lling the fuel tank.

 

 

-   Wipe up

 any fuel spilt on the machine and move the equipment away from the area where fuel has  

    been 

spilt.

 

 

-   Store

 fuel in approved containers only and do not expose to direct sunlight.

 

•   Parts of the engine, and particularly the exhaust system will get very hot during use, and will remain hot  

 

  for some time after the generator has stopped. 

 

•   Do not use the equipment with loose or missing components or guards. 

 

•   Additional care should be applied if using the generator in damp or wet conditions. 

 

•   The throttle control lever is preset to the correct engine speed and must not be adjusted, otherwise    

 

  damage to equipment or the generator may be caused and will invalidate the warranty. 

 

•   Regularly inspect the condition of trailing cables and integrity of connectors. Only use correctly rated cable  

 

  and standard plugs of suitable capacity for the application. 

 

•   During servicing, follow HSE recommendations regarding the handling and disposal of contaminated oil  

  products. 

Earthing    

The earth pins of the output socket(s) are electrically connected to the metalwork of the generator.

VRP80-TIN12-TL 110V CTE with centre tap to earth.

VRP96D-TL has the neutral connection 

fl

 oating and not tied to earth.

VRP96T-TL has a star neutral point which is 

fl

 oating and not tied to earth.

Further advice on earthing can be found in the following Health & Safety Executive publications (available from 
HMSO):

 

•   GS27 Protection Against Electric Shock

 

•   GS24 Electricity on Construction Site

 

•   PM53 Emergency Private Generation

Summary of Contents for VRP80-TIN12-TL

























Reviews: