background image

Harrington Generators International

1

        498-1019

Petrol Generator

Introduction

Introduction

Thank you for purchasing a quality generator, carefully 
manufactured to the highest standards by one of the 
World’s leading generator manufacturers, Harington 
Generators International (HGI). 

This range of Dual Voltage 110V/230V/400V 
are generally used for industrial use and are 
not CE marked for European Noise Directive. 

Before operating the generator, read this manual and 
make sure that all personnel who operate the equipment 
have access to the manual (and any additional 
documentation supplied with it) and are fully aware with 
the operation and functionality of the generator prior to 
use. 
 
Misuse of the instructions may invalidate the product 
warranty and lead to potential accidents.

This manual is an essential part of the generator and 
should be kept with the generator at all times. Make 
sure that the manual is available to all users throughout 
the generator’s life-span.

If in doubt about the functionality of any of the equipment 
within this document please contact HGI or seek other 
expert advice.  

Every effort has been made to ensure that the 
information given in this manual is correct at the time of 
publishing. However, it may be superseded due to our 
continuous improvement processes. 

HGI Limited manufacture a wide range of generating 
sets and accessories, including generators approved 
for use in Telecoms, Railway and Military applications 
where quality and reliability are essential. These 
include:

• 

Petrol Generators  

• 

Petrol  Welders

• 

Gas & Water ECE3 (TIN12) 

• Trackside
• Tractor 

PTO 

• 

Super Silent Diesel Generators (3000rpm)

• 

Super Silent Diesel Generators (1500rpm

• 

Automatic Mains Failure Control Systems

• Welf-Air 

Generators 

• 

Compact Welf-Air Generators

• 

Super Compact Welf-Air Generators

• 

Super Silent Diesel Welders

For further information call us now on : 

+44 (0)1629 824 284 

our experienced and knowledgeable sales staff  will be 
happy to advise you and provide a detailed quotation 
for all your generator requirements or visit our website 

www.HGIgenerators.com

 

VRP96

Summary of Contents for VRP80-TIN12-TL

























Reviews: