6
The button “
” is used to confirm the setting and switch to the next setting interface. When
switching to last interface, press button “
” again, it will exit the system parameter setting mode
and switch back to the real-time data display interface.
At any setting interface, press button “
” and “
” simultaneously, it will exit the setting interface
and switch back to the real-time data display interface.
6.3 Process of Setting Parameters
Password Inquiry Meter Address Baud Rate Voltage Wiring Mode
Current Wiring Mode PT Ratio CT Ratio
6.4
Parameters Setting Steps
6.4.1 “PS” Interface, i.e. Password Inquiry Interface
Press buttons “
” and “
” simultaneously, it will enter password inquiry interface. Enter meter
password, whose default is “0000”. After setting, press button “
” to confirm and enter “ID”
interface. If the password is not correct, it won’t enter “ID” interface
6.4.2
“ID” Interface, i.e. Meter Address Interface
This interface displays the present meter address, whose value ranges from 1 to 247. Enter meter
address, whose default is “001”. After setting, press button “
” to confirm and enter “BT” interface.
