LS-R-4.8
25
2.4 Aligning the scanner for measuring
NOTICE
Risk of incorrect measuring data!
The sensor’s insensitivity to extraneous light is 5000 lx. This permits measuring under diffused, artificial light. If
the sensor is pointed directly at an artificial light source during operation or exposed to direct sunlight, the direct
incidence of light can lead to the recording of incorrect measuring data.
•
Do not point the sensor directly at light sources during operation.
•
Dim or shade the direct light source if the sensor needs to be aligned directly with the light source.
2.4.1 Marking of the transmission window on the scanner housing
For correct alignment of the laser scanner for measuring, the scanner housing is marked on one side with an arrow
directly below the laser warning symbol (see Fig. 11). The laser transmission aperture (transmission window) is
located on this side.
Marking of the laser transmission window
Summary of Contents for LS-R-4.8
Page 1: ......
Page 12: ...Description LS R 4 8 12 1 7 Markings Markings 2 3 4 5 6 7 1...
Page 34: ......
