Gateway IP Address [172.17.0.3]:
FalconX3ICM1:admin>
7.
Verify the IP address as described in section
on page 15.
Firmware update
Hewlett Packard Enterprise generally recommends running the latest firmware release. For information on
the latest supported, target path, and minimum required versions of firmware, see the B-series FC Switch
connectivity stream document at
http://www.hpe.com/storage/spock
.
To access the B-series Stream file, follow the steps:
1.
On the left pane, select
Switches
under
Other Hardware
.
2.
Select the
B-Series FC Switch Connectivity
for FC Switches.
To access the latest Fabric OS firmware, configuration files, and MIB files, see the
website.
Procedure
1.
Enter
Brocade 32Gb SAN Switch for HPE Synergy
at the prompt.
2.
Select the correct switch model from the search results.
3.
Select
Get drivers, software and firmware
, click
Firmware
under
OS Independent Downloads
.
4.
To read the Brocade Release Notes, click the
Manuals
link under the
Knowledge Base
tab.
5.
To read the HPE Release Notes, click the
Release Notes
tab in the firmware download page.
6.
To verify the firmware download is complete, see the
Fabric OS Administrator Guide
in the
Manuals
section.
Configuring the Brocade 32Gb FC Switch Module
The Brocade 32Gb FC Switch Module must be configured to ensure correct operation within a network
and fabric. For instructions about configuring the switch to operate in a fabric containing switches from
other vendors, see the
HPE SAN Design Reference Guide
:
http://www.hpe.com/support/SAN/docs
For more information about the CLI, see the latest version of the
Fabric OS Command Reference Guide
.
Set the Switch parameters using the following management tools:
• CLI
• Advanced Web Tools GUI
Items required for configuration
To configure and connect the Brocade 32Gb FC Switch Module for use in network and fabric, the
following items are required:
• Brocade 32Gb FC Switch Module installed in the frame
• IP address and corresponding subnet mask and gateway address recorded during the
on page 15 procedure
Setup
17
