For example:
switchName:admin> date 101614302018
Tue Oct 16 14:30:00 UTC 2018
switchName:admin> date
Tue Oct 16 18:26:30 UTC 2018
For details about changing time zones, see the
tsTimeZone
command in the latest version of the
Fabric OS Command Reference Guide
.
Verifying installed licenses
To determine the type of licensing included with your Brocade 32Gb FC Switch Module, enter
licenseshow
at the command prompt, as in the following example:
switchName:admin> licenseshow
TWttACXRLrmN4GrGFKgPMRM33mBQFaDABA9EC:
Extended Fabric license
Trunking license
Fabric Vision and IO Insight license
GWaAYWK39tKKmNZQ4gmtPgE4GX9KrMtNFLPrftEAAF3A:
Ports on Demand license
Capacity 16
NOTE:
For more information about the CLI, see the latest version of the
Fabric OS Command Reference
Guide
.
Modifying the FC domain ID [Optional]
You can modify the FC domain ID. The default FC domain ID is
domain 1
. If the Brocade 32Gb FC
Switch Module is not powered on until after it is connected to the fabric, and the default FC domain ID is
already in use, the domain ID for the new switch is automatically reset to a unique value. If the switch is
connected to the fabric after is has been powered on and the default domain ID is already in use, the
fabric segments.
Enter
fabricshow
to determine the domain IDs that are currently in use.
To modify the domain ID:
Procedure
1.
Enter
switchdisable
to disable the switch.
2.
Enter
configure
, and then enter a new value or press
Enter
to accept each default value.
3.
At the Fabric parameters prompt, enter
Y
and press
Enter
:
Fabric parameters (yes, y, no, n): [no]
y
4.
Enter a unique domain ID. For example:
Domain: (1..239) [1] 3
5.
Complete the remaining prompts, or press
Ctrl+D
to accept the remaining default settings.
6.
Enter
switchenable
to re-enable the switch.
7.
Enter
fabricshow
to confirm any changes made to the domain ID.
Setup
19
