Hewlett Packard Enterprise Aruba 7 Series, Manual, Page: 6 / 44

Share

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
23 pages after

Page: 6 / 44

Hewlett Packard Enterprise Aruba 7 Series Manual Download Page 6

Overview

Aruba 7XXX series Mobility Controllers are optimized for 802.11ac and mobile app delivery. Fully

application-aware, the 7XXX series prioritizes mobile apps based on user identity and offers exceptional

scale for BYOD transactions and device densities.

With a new central processor employing eight CPU cores and four virtual cores, the 7XXX series supports

over 32,000 wireless devices and performs stateful firewall policy enforcement at speeds up to 40 Gbps –

plenty of capacity for BYOD and 802.11ac devices.

New levels of visibility, delivered by Aruba AppRF on the controller, allow IT to see applications by user,

including top web-based applications like Facebook and Box.

The 7XXX series also manages authentication, encryption, VPN connections, IPv4 and IPv6 services, the

Aruba Policy Enforcement Firewall™ with AppRF Technology, Aruba Adaptive Radio Management™,

and Aruba RFprotect™ spectrum analysis and wireless intrusion protection.

The Aruba controller configurations validated during the cryptographic module testing included:

•

Aruba 7005-F1

•

Aruba 7005-USF1

•

Aruba 7010-F1

•

Aruba 7010-USF1

•

Aruba 7024-F1

•

Aruba 7024-USF1

•

Aruba 7030-F1



Aruba 7030-USF1



Aruba 7205-F1



Aruba 7205-USF1



FIPS Kit: 4011570-01 (Part number for Tamper Evident Labels)



The firmware versions validated are ArubaOS 6.4.4-FIPS and ArubaOS 6.5.0-FIPS

Note: For radio regulatory reasons, part numbers ending with -USF1 are to be sold in the US only. Part
numbers ending with -F1 are considered ‘rest of the world’ and must not be used for deployment in the
United States. From a FIPS perspective, both -USF1 and -F1 models are identical and fully FIPS
compliant.

6

|

Aruba 7XXX Series Controllers FIPS 140-2 Level 2 Security Policy

«
...
4
5
6
7
8
...
»

Summary of Contents for Aruba 7 Series













































Reviews:

No comments