Figure 15 Required TELs for the Aruba 7024 Mobility Controller – Bottom
The Aruba 7030 Mobility Controller requires a minimum of 6 TELs to be applied as follows:
To Detect Opening the Chassis Lid Top
•
Spanning the front bezel and the chassis lid, as shown in Figures 16 & 17 (Label 1).
To Detect Opening the Chassis Lid Bottom
•
Spanning the bottom and the chassis lid, as shown in Figures 16 and 18 (Labels 3, 4, 5 and 6).
To Detect Access to Restricted Ports
•
One label (label 2) spanning the RJ-45 and mini-USB serial ports, as shown in figure 16 (Label 2). Press down
on this label to ensure that it adheres to a sufficient area of the front bezel. The RJ-45 port is raised relative to the
bezel so there will be some air gap under the label in this area. However, the air gap should not be larger than 2-
3mm.
38
|
Aruba 7XXX Series Controllers FIPS 140-2 Level 2 Security Policy