Hettich AG, Seestrasse 204a, 8806 Baech, Switzerland
Operator_Manual_Rotolavit II_und_Rotolavit II-S_en_rev2.5
Seite 10
2.3 Responsibility of the owner
The owner of the device:
is responsible for the flawless condition of the device and for its proper operation in accordance with the
specifications.
is responsible for ensuring that persons who are to operate or service the device are qualified to do this,
have been instructed accordingly and are familiar with the operating manual at hand.
must know about the applicable guidelines, requirements and operational safety regulations, and train
staff accordingly.
is responsible for ensuring that unauthorized persons have no access to the device.
is responsible for ensuring that the maintenance plan is adhered to and that maintenance work is carried
out properly (see chapter 12).
must ensure that the device and its surroundings are kept clean and tidy, for example through
corresponding instructions and inspections.
is responsible for ensuring that personal protective clothing is worn by operating personnel, e.g. work-
clothes, protective gloves.
is responsible for ensuring that before starting work with this device all qualifications are released, the IQ
(Installation-Qualification), the OQ (Operational-Qualification) and PQ (Process-Qualification).
is responsible for periodic routine to flush, clean and disinfect the device as well, described in chapter 12,
and take care of controlling the used fluid for the needed quality.
is responsible for the use of the password-protection, user-settings (cha.8.6.2).
2.4 Requirements of the operating personnel
The device may only be operated and maintained by persons who are of legal age and have been instructed
accordingly. Personnel who are to be trained, instructed or who are undergoing general training may only work
with the appliance under the continuous supervision of an experienced person.
Repairs may only be performed by qualified electricians who are authorised to do so by the manufacturer. The
regulations in the separate service manual must be observed.
2.5 Changes and alterations
No unauthorized changes or alterations may be made to the device. No parts may be added or inserted which
have not been approved by the manufacturer.
Unauthorized modifications or changes result in the CE declaration of conformity losing its validity and the
device should no longer be operated.
The manufacturer is not liable for any damage, danger or injuries that result from unauthorized changes or
alterations, or from non-observance of the regulations in this manual.
