EN
30/45
Rev. 01 / 11.2022
AB1101EN_SA
20.6
Displayed centrifugation parameters after switching on the device
It can be set whether the centrifugation parameters of the last used program or of program 1 should be displayed
after switching on the device.
With the rotor at a standstill, this can be set as follows:
The procedure can be aborted at any time by pressing the
STOP
OPEN
key. In this case, the settings are not stored.
Press and hold the button for eight
seconds.
PROG
t/min:s
RPM
Press the key until the following is
displayed:
PROG
t/min:s
RPM
START
PULSE
Press the key.
PROG
t/min:s
RPM
PROG
t/min:s
RPM
Press the key until one of the following is
displayed:
Start Pr :
Displayed program after
switching on.
First :
Program 1.
Last :
Last used program.
PROG
t/min:s
RPM
PROG
t/min:s
RPM
Set
First
or
Last
with the keys.
PROG
t/min:s
RPM
PROG
t/min:s
RPM
START
PULSE
Press the key to save the setting.
PROG
t/min:s
RPM
PROG
t/min:s
RPM
STOP
OPEN
Press the key once to exit the "
Settings"
menu or press twice to exit the "
MACHINE MENU ".
PROG
t/min:s
RPM
Example:
PROG
t/min:s
RPM
