Hettich AvanFit YOU 300, Operating And Assembly Instructions Manual

Page: 21 / 96

21
• Setting cabinet body width
a) Preset to 16 mm
b) Undo the fixing screws
c) Undo latch bolt and screw back in again from the other side
(19mm)
d) Screw fixing screws back in and tighten
7. Operation
7.3 Starting machine
Make sure that the safety guards on the machine are in place and
provide protection.
The following procedure must be carried out on starting the
machine:
• Turn on the main switch.
• Connect to pneumatic energy.
• Place individual parts in the assembly jig.
7.4 Sequence of movements
Setting drawer width
• Release clamping lever!
• Pull latch bolt, move to required dimension and let it snap
into place!
• Tighten clamping lever!
Setting drawer depth
• Pull latch bolt, move to required dimension and let it snap
into place!
Repeat process on opposite side.
en