24
3. Installation instructions
General information
The Green 250 pellet stove must only be instal-
led in residential environments.
The stove installation must be in accordance
with national, European and possibly local re-
gulations. You must follow local regulations with
regard to installation of chimney and connection
to the chimney. Be aware that it is always the
owner himself who has responsibility for ensu-
ring that applicable rules are complied with.
A modern pellet stove places heavy demands
on the chimney due to the high efficiency. It may
be necessary to enhance or even replace an old
chimney.
The stove has fully automatic control, ensuring
controlled combustion. The control system ma-
nages the ignition process, three heat levels and
shutdown, ensuring that the stove functions
correctly.
Placement
The position of the stove within the home will
have a major impact on heat distribution.
Before deciding where to place the stove, it is
important to consider the following:
a) The air supply for combustion must
come from a ventilated room or an open
outdoor area.
b) Installation in a bedroom is not advised.
c) The stove must be installed in a spaci-
ous and central location in the house to
ensure the best heat distribution.
Safety information
The Green 250 pellet stove must be installed by
a technician who has been trained by Heta A/S.
Please read these instructions regarding use
and maintenance carefully before installing and
lighting the stove! If you need further informa-
tion, please contact the dealer from whom you
purchased the stove.
NOTE
The stove has extra protection in
line with power regulations, and
must have an earthed electrical
connection.
Liability
By providing these instructions, Heta A/S dis-
claims all liability, both personal and statutory,
for any accidents that may arise due to failure
– either fully or in part – to observe the instruc-
tions enclosed herein.
Heta A/S disclaims all liability in relation to in-
correct use of the stove, abnormal usage by the
customer, unauthorised replacement and/or re-
pair, or the use of non-original spare parts for
this model.
The manufacturer disclaims all liability, both
personal and statutory, direct and indirect,
attributable to:
• Inadequate maintenance
• Failure to observe the instructions in this
manual
• Failure to observe safety directions
• Irregular installation with failure to ob
serve applicable standards in the
destination country
• Installation carried out by unqualified or
untrained personnel
• Replacement or repair not authorised by
the manufacturer
• Use of non-original spare parts
• Extraordinary events
If you have any questions con-
cerning your pellet stove, Heta
strongly recommends that you
contact your dealer immediately.
Floor
You must ensure that the floor can support the
weight of the stove and a top-mounted steel
chimney.
In front of the pellet stove, the substrate must
consist of non-combustible material, for ex. Ste-
el/glass plate, stone or tile floor. The size of the
non-combustible surface must follow the appli-
cable national and local regulations.
