4.2 Powering Camera Unit
08
pic.4
4.3 Mounting Camera unit
The camera unit was designed to
s u p p o r t d i f f e r e n t m o u n t i n g
mechanism, from simply putting
on a table to mounting on a wall
by screw or double-sided tape.
1. Tighten the provided screw
the provided screw onto the wall
surface by a screw driver, until
the screw only sticks out by
about 6mm as shown in
pic. 5
.
2. Remove the base plate from
camera stand, and hook the
camera stand onto the screw.
Mount the camera unit by screw
pic.5
6mm
Plug the A/C adapter into the
w a l l e l e c t r i c a l o u t l e t . T h e n
attach the cord to the DC Jack as
shown in
pic. 4
.
