34
HE 5422 Operating Instructions
# 342338 | Version 1.3
9.2 Parameterization with device keyboard
1.
Press the PARA key to change the values of the
system parameters. The LED on the PARA key lights
up yellow.
The LED of the parameter currently to be changed
lights up.
codE
2.
If a password has been assigned,
codE
appears in the
display.
3.
Press the ENTER key.
or
4.
Press the UP or DOWN keys to set each place of the
password.
5.
Press the ENTER key to confirm the password.
As long as you remain in the parameter menu, the
password does not have to be entered again.
and
6.
Use the UP and DOWN keys to select the desired
parameter.
The current value is shown on the display.
7.
Press the ENTER key to change the value of the
parameter. The first digit to be changed flashes on the
display.
and
8.
Use the UP and DOWN keys to set or change the
value.
9.
Press the ENTER key to accept the value.
The next digit then flashes on the display.
10.
Repeat steps 8 + 9 to set the second and third digits.
The next parameter is offered.
or
11.
Change the next parameter, if necessary.
12.
Pressing the PARA key again quits parameterization
mode. To return to the parameter menu, the password
must be entered again.
