HE 5422 Operating Instructions
# 342338 | Version 1.3
19
6
Electrical commissioning
Before switching on the device, note the following points:
Connect the cable firmly to the screw connections. The power supply must correspond to the
voltage indicated on the nameplate.
The device may only be operated when it is closed.
The temperature restrictions specified for the use of the device must be observed before and
during operation.
The protective conductor connection in the corresponding device carrier must be conductively
connected to the protective conductor.
Danger of Electrocution!
Electrical installation must only be carried out when the power is
disconnected.
Warning of material damage caused by electrostatic charge!
Observe the safety measures according to DIN EN 61340-51/-3 to avoid
electrostatic discharge!
Note!
Work on the electronic systems may only be carried out by qualified
specialist personnel.
