Herutu 21D-429C, Instruction Manual

Page: 61 / 76

21D-429C
53
Applied operation
<Tact reserving procedures>
To reserve the tact, register
“Tact”, “Target production quantity” and “Setup time”
beforehand.Register the Reserve No. 1-20.
Setting
range
Contents
Reserved
work
20 works
Tact 0.1~9999.9-sec or 0.01-999.99-sec
Target
production
quantity
4-digit-type:0-9999 5-digit-type:0-99999
Setup time 0-998
①
Press [F1] key.
②
Input [1] key and carry out
“Registration”.
Input the tact of the first work (Reserve No.1).
<e.g.>For 12.4 sec, input [1], [2] and [4]in this order.
Press [ENT] to register the tact.
If you have inadvertently pressed a wrong data, press [CLR] key and input [1],[2]
and [4] in this order once again and then press [ENT] to register.
If [ENT] key is pressed without inputting anything, the Step
①
comes back without
being registered.
③
Input the target production quantity of the first work (Reserve No.1).
<e.g.>For 200, input [2],[0] and [0] in this order.
Press [ENT] key to register the target production quantity.
If you have inadvertently pressed a wrong data, press [CLR] key and input [2],[0] and [0]
in this order once again and then press [ENT] to register the target production quantity of
the Reserve No.1.
｛Ｆ１｝Ｔ．Ｒｓｖ
１：Ｒｓｖ ２：ＲｓｖＮｏ．
[Tact reserve menu screen]
※
T.Rsv
：
Tact Reservation
Ｆ１１－０１ ［＊＊＊＊．＊］
Ｔａｃｔ ［ １２．４］
[
＊
]present data
“01” indicates Reserve No 1.
Ｆ１１－０１
[
＊＊＊＊
]
Ｑｕａｎｔｉｔｙ ［ ２００］
[
＊
]present data
“01” shows the Reserve No.1.