Herutu 21D-429C, Instruction Manual

Page: 45 / 76

21D-429C
37
Basic operation
*If you need to change only optional
“START” or “FINISH”, scroll the screen with [+]/[-]
key to change it.
[+]
↓ ↑
[-]
[+]
↓ ↑
[-]
*Pressing [ENT] key without any input lets you set that working hours without any change.
(The data before this have been changed.)
For 0: 00, set 24:00.
For 0: 01, set 00:01.
Since the machine has the unit of 24 hours, you cannot set any start of working hours
exceeding the end of working hours.
<e.g.>You cannot set any start time of 8:00 A.M. and any end time of 10:00 A.M. on the next
day.
After setting the end of working hours, be sure to set [0].
Unless [0] is set, the machine does not recognize the end time of working hours and so does
not have the normal computation. If [0] is set en route, further data after that setting is all
ignored. If the set time is odd number (FINISH screen), the end time of working hours has not
been set. Accordingly [0] cannot be set in this case.
A single working hour set is for 20 working hours, which is equivalent to 40 set times.
The working hour setting is only effective when working hour setting
“Yes” is set in Function
settings. If
“No” is set, it cannot be set.
［００］ＳＴＡＴ ［＊＊：＊＊］
Ｉｎｐｕｔ ［ ： ］
［０１］ＦＩＮＳ ［＊＊：＊＊］
Ｉｎｐｕｔ ［ ： ］
［０２］ＳＴＡＴ ［＊＊：＊＊］
Ｉｎｐｕｔ ［ ： ］