H8 DSP
Digital Interface Processor
User’s manual
9
TARGE
T
MODE
OFF
TARGE
T
MODE
ON
43
If, when launching the
H8 DSP
PC software the “
H8 DSP Warning
” window
appears, the user can choose between the following two ways to proceed:
A -
Use a previous version of the PC software.
E.g.:
when using PC software v.1.0, open v.0.9;
B -
Update the
H8 DSP firmware
. In this case proceed as follows:
-
Save the previous setup (in case you want to open it in
OFFLINE
mode);
-
Unplug the
H8 DSP
from the amplifiers;
-
Turn the
H8 DSP
off, disconnect the power supply;
-
Set the
UPGRADE MODE
to
ON
;
-
Reconnect the power supply and turn the
H8 DSP
on;
-
Restart the
H8 DSP
PC software and select
RESCUE MODE
-
The screenshot on the right shows the Boot Loader version c
urrently installed on the processor, enabling the access
to the menu for the update.
- Proceed as detailed in 9.3.4
C -
when the update procedure is complete set the switch
“
UPGRADE MODE
” to “
OFF
”position.
9.4
RESCUE MODE
