Select XLS Towel heater
General
Please note it is possible the heater may discolour with use
–
this is caused by airborne pollution and
is not a fault.
The heater is designed to last many years and incorporates several safety features, but if the heater
has not been used or installed in adherence to these instructions, emits any noise, smell, or shows
rapid discolouration of the surface, discontinue using the heater and refer to Herschel Customer
Service or your local Herschel dealer.
The Herschel panel must be installed, uninstalled, cleaned or transported only when cold.
Painting
Do not paint the Select XLS Towel heater.
Cleaning and maintenance
Cleaning
Before attempting to clean the panel, unplug the heater, isolate the unit from the electrical supply
and allow it to completely cool down.
DO NOT immerse the Herschel panel heater in water or splash water onto it.
Clean the heater with a damp cloth. For glass models glass cleaner can be used. Never use a wet
cloth. When clean, dry the surfaces with a dry cloth.
DO NOT apply abrasive materials, solvents or solvent wipes to the surface as this can cause
irreparable damage. Wait until the unit is completely dry before use.
Repair
DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit, doing so will
void your warranty. Repairs must only be carried out by Herschel or an authorised Herschel service
partner.
Disposal
The heater is an electrical product and must not be disposed of in household waste. A high
percentage of the heater can be recycled. Please treat as electrical waste and recycle in accordance
with local regulations.
ENGLISH
