Select XLS Towel heater
Pairing the Towel Heater with SmartLife
ENGLISH
Scan the QR code below to download the Smartlife App from the App Store or Google Play.
Alternatively, search “Smart Life” on Google Play or the App Store & look for this icon.
Download & Install the Smartlife App
After installing and opening the Smartlife App, you must register an account using an email address and
password and accept the terms of use.
Tap ‘+’ top right of App
Select “Small Home Appliances”
and then “Thermostats”
If
this
is
your
first
thermostat you are adding
you will be asked to enter
your Wifi password.
You will not have to do
this
when
you
add
subsequent
thermostats
to the App.
Turn your Towel heater ON (or turn it OFF and then turn it back ON to start Wifi Discovery).
The wifi indicator on the Towel heater should be rapidly blinking.
Confirm in the Smartlife App that the wifi indicator is rapidly blinking and the pairing process will start. Please let
the process run to 100% completion on the app.
The pairing process is very reliable on a 2.4GHz connection. Should the process fail please ensure you are on a
2.4GHz connection and retry the pairing process.
In all pairing steps please ensure your mobile phone and the towel heater are connected to the 2.4GHz wireless
connection. Pairing will not be successful using a 5GHz connection.
Control of Wifi
Wifi connection will always be attempted when the heater is switched on. If the heater has never been paired
with the Wifi, then the Wifi Indicator will flash for a short period and then go out. If the heater has been paired
with the wifi, then the Wifi indicator will flash for a short period and then remain on.
Wifi can temporarily be turned off by pressing the
“
-
”
button for 10 seconds. It can be turned back on by pressing
“
-
”
again for 10 seconds. To disconnect the heater from Wifi entirely, press the
“Timer”
button on the
touchscreen for 8 seconds until the WiFi indicator starts to flash again. The heater will then operate without
WiFi.
