T-MT Mains powered
wifi thermostat
Calibration
Calibration is a process to alter the temperature of the T-MT up or down in order to
align the unit with another thermostat. The T-MT can be calibrated 5
°
C up or down
from the default of 0 (no calibration).
Calibrating UP (i.e. +1
°
C etc) means the T-MT will display a higher temperature than
the present one being shown. Use this when you think the T-MT is under-reading
compared with another thermostat.
Calibrating DOWN (i.e. - 1
°
C etc) means the T-MT will display a lower temperature
than the present one being shown. Use this when you think the T-MT is over-reading
compared with another thermostat.
When adjusting the T-MT Time & Temperature settings using the SET button,
calibration is the final setting you can change. The default is 0. Use + or
–
keys to
adjust this figure up or down.
You can also change calibration using the Smartlife App.
2 Year Warranty
Register your product at the Help & FAQs section of your local Herschel website..
Within two years from date of purchase Herschel will repair or replace the T-MT
where the fault is due to defects in materials or workmanship. This warranty is for
standard domestic use only and excludes commercial uses. In the event of a warranty
claim please visit the Customer Service area of the Herschel Website and follow the
Warranty Claim process. You will need proof of purchase.
Note your serial number here.
