T-MT Mains powered
wifi thermostat
3. Press SET again to advance to change the minutes and use the + or
–
keys again to
adjust.
4. Press SET again to advance to change the hour and use the + or
–
keys to adjust (it
is a 24 hour clock).
5. Press SET again to Calibrate the temperature of the T-MT to match another
thermostat. Calibration is not usually necessary and we explain its use later. If
you need to Calibrate, perform this step here.
6. The T-MT automatically saves your changes as you enter them.
7. If you use the T-MT with the Smartlife App, your controller and phone will
automatically synchronise time and date settings, making this step unnecessary
using the Smartlife App.
Selecting & Using Operating Modes
To select Manual (MAN) or Programming (PRG) modes, press the PRG button until the
mode you require is shown at the top of the display.
Manual Mode
Select the Manual mode by clicking the PRG button until MAN is shown on the display.
Use the + or
–
buttons to set the temperature you want the T-MT to maintain in the
room.
Note that the T-MT will maintain this temperature 24 x 7 until you switch to another
mode.
Programming the T-MT
To change the program defaults, proceed
as follows.
Mon - Fri
Sat - Sun
Period 1
06:30 21
°
C
08:00 21
°
C
Period 2
08:00 18
°
C
10:00 18
°
C
Period 3
18:00 21
°
C
18:00 21
°
C
Period 4
22:30 16
°
C
23:00 16
°
C
Program Mode
The T-MT comes with the following
program defaults which you can keep or
change.
