69
(1) UPPER level mark (2) LOWER level mark
(3) Oil level dipstick
(1) Drain bolt
•
Remove the oil strainer screen cap (2).
•
Remove the oil level dipstick.
•
Place an oil drain pan under the crankcase
and remove the oil drain bolt (1).
Engine oil replacement/Oil strainer
cleaning
Change the engine oil with the engine at
normal operating temperature and the vehicle
on its main stand to assure complete and rapid
draining.
•
Running the engine with insufficient oil may
cause engine damage.
•
Top up if required after every 3000 km.
NOTE
1
2
1
•
If required, add recommended oil up to the
upper level mark. Do not overfill.
•
Reinstall the oil level dipstick. Check for oil
leaks.
•
Switch “OFF” the i3s switch.
•
Start the engine and let it idle for few
minutes.
•
Stop the engine and park the vehicle
on the main stand on a level surface.
•
After a few minutes, remove the oil level
dipstick, wipe it clean and reinsert the oil
level dipstick without screwing it in. Remove
the oil level dipstick and check if the oil level
is between the upper and lower marks.
3
(2) Oil strainer screen cap
2
Summary of Contents for JFW01
Page 4: ......
