(1) Screw (A) Up (B) Down
A
B
1
An improperly adjusted headlamp may blind
oncoming driver or it may fail to light the road
for safe distance.
WARNING
!
!
•
Adjust the headlamp beam vertically by
loosening the screw (1) and move the
headlamp up (A) or down (B) for correct
focus.
•
Turn the ignition switch to “ON” ( )
position and start the engine.
PRE-RIDE INSPECTION
For your safety, it is very important to take a
few moments before each ride to walk around
your vehicle and check its condition. If you
detect any problem, be sure you take care of it
or have it corrected by your Authorised
Distributor/Dealer.
•
Engine oil level
-Add engine oil if required
(page 68 )
. Check for leaks.
•
Front and Integrated brakes
-Check
operation and if necessary, adjust free play
(page 20)
.
•
i3s system
-Make sure that i3s system is
functional properly
(page 28)
.
•
Rear view mirror
-Ensure that the rear
view mirror gives a good rear view when
you are sitting on the vehicle.
•
Low fuel indicator
-Vehicle should not be
operated with low fuel indicator glowing
continuously
(page 19)
.
•
Throttle
-Check for smooth opening and
full closing in all steering positions.
•
Tyres
-Check condition and pressure
(page 24)
.
•
Fuel level
-Ensure sufficient fuel is available
in your fuel tank for journey
(page 19)
.
Check for leaks.
•
Lamps and horn
-Check that headlamp,
tail/stop lamp, turn signal lamps, indicators
and horn function properly.
•
i3s switch
-Make sure whether the i3s
switch is in “ON” or “OFF” position
(page
28)
.
•
Improper maintenance or failing to correct a
problem before riding can cause a crash in
which you can be seriously injured.
•
Always perform a pre-ride inspection before
every ride and correct if any problem.
WARNING
!
!
49
Summary of Contents for JFW01
Page 4: ......
